How Does A Two Stroke Engine Works?

 The 2 stroke engine is a type of Internal combustion engine where one power cycle is completed with two strokes of the piston during only one rotation of the crankshaft. The first commercial two-stroke engine involving in-cylinder compression is attributed to Scottish engineer Dugald Clerk.

The 2 stroke engine performs all the same steps which are performed by 4 stroke engine – suction, compression, expansion & exhaust; but the 2 stroke engine performs these all steps in only 2 stroke, unlike the 4 stroke engine which completes one power cycle in 4 strokes.

The parts which a 2 stroke engine has –
Piston – In an engine, the piston is used to transfer the expanding force of gases to mechanical rotation of crankshaft via a connecting rod. The piston is able to do this because it is secured tightly within the cylinder using piston rings to minimize the clearance between cylinder and piston!
Crankshaft – A crankshaft is a part which is able to convert the reciprocating motion to rotational motion.
Connecting rod – A connecting rod transfers motion from a piston to crankshaft which acts as a lever arm.

Counterweight – Counterweight on the crankshaft is used to reduce the vibrations due to imbalances in the rotating assembly.
Flywheel – Flywheel is a rotating mechanical device that is used to store energy.
Inlet & Outlet ports – It allows us to enter fresh air with fuel & to exit the spent air-fuel mixture from the cylinder.
Spark Plug – A spark plug delivers electric current to the combustion chamber which ignites the air-fuel mixture leading to the abrupt expansion of gas.

Working of 2 stroke engine:-

Down Stroke:-

First, the piston is moved downside from TDC to BDC to let the fresh air enter into the combustion chamber. The fresh air-fuel mixture gets into the combustion chamber through the crankcase. Crankshaft rotation – 180°

Up Stroke:-

Here happens all the magic. The piston is pushed up from BDC to TDC. The fuel-air mixture gets compressed & spark plug ignites the mixture. As the mixture gets expanded, the piston moves down. During the upstroke, the inlet port is opened.  While this inlet port is opened, the mixture gets sucked inside the crankcase. When the mixture is pushed up into the combustion chamber during the previous upstroke, a partial vacuum is created as no mixture is left behind in the crankcase. This mixture is ready to go into the combustion chamber during downstroke but remains in the crankcase until the piston goes up till TDC. Crankshaft rotation – 360°

Two strokes get completed along with one power cycle.
From the 2nd downstroke onwards the exhaust gases get expelled out from one side while a fresh mixture enters into the combustion chamber simultaneously due to partial vacuum created in the combustion chamber after removal of exhaust gases. This is the beauty of the engine. Both things happen at the same time which makes it a 2 stroke engine.

No comments